Showing posts with label skills. Show all posts
Showing posts with label skills. Show all posts

Monday, September 20, 2010

Writing papers

After nearly a year of letting my brain atrophy, I finally gathered myself to write a 1500-word, 5-page paper. It was not an easy task, because I didn't know what made me tick previously. Only upon further reflection did I realize that there were some strategies I could've employed to get myself started earlier.

So, here are my tips for "forcing out" the first drafts of essays:

1. Outline your essay. It's as simple as writing out the points you're going to talk about and naming an example to support it. This is easy if you're given a prompt and all you have to do is to respond to it. But what if there's no prompt, and you have to formulate your own thesis statement?

2. If there's no prompt, and you have no idea where to start, just write a general introduction of the topic. Intros tend to start off with a broad view before you narrow your focus. So, write something generic (you can always edit this later) and see what sort of thesis statement your writing naturally brings you to. Then attempt to sketch out an outline of your essay with that. If you don't seem to be getting anywhere, start again, but tweak the words and see where that lands you. Repeat until you feel comfortable with your essay outline.

Remember this: Your gut instinct tends to be right. You will know, deep down inside, whether you'll eventually be able to "force" however many words/pages you need out of that sketch you just did, based on previous experience. (This assumes you've done academic writing before; if you haven't, your topic tends to be of the "prompt" kind, so you don't have to worry about this anyway).

3. Forget about breaking the essay up into tiny little pieces. Have you ever heard the advice to write 100-200 words whenever you can, just to make progress on your essay? Maybe this works for some of you, but for most, it just makes your essay sound disjointed, both in content and style. The fact is, you aren't going to be able to concentrate and come up with something innovative in that half hour between PE and dinner. Your brain needs to be "in the zone".

So: set aside large chunks of time to work on the essay. Instead of squeezing in four half-hour sessions, clear 2 hours of your time. During that two hours, sit down and squeeze that essay out of your head. You'll find that, once you get started, your ideas come much more easily, and the end result will be a more coherent, flowing essay.

4. While working on your essay... remove distractions. Turn off the internet, and more importantly, make it difficult for yourself to get back on the internet. If you need to research articles, do it before working on the main body of your essay. We all think we can multitask, but really, Facebook and MSN are far too addictive.

5. Make your habits (good or bad) work for you, rather than trip you up. What do I mean by this? Well, let's look at me. I'm extremely lazy in a physical sense. I don't like to have to get up and go somewhere, and I'd rather just sit in my seat if I can. So what I did was to shift myself to my bed (I'm good at resisting the temptation to just fall asleep, so this works for me, but it might not work for you), bringing my laptop and reading materials with me. I bought a wireless router but was too lazy to install it, so I'm stuck with my ethernet cable at my desk. Thus, being on my bed directly prevents me from using the internet because I'm far too lazy to heave myself off and bring everything back to the desk. And being stuck there, unwilling to move, did wonders for my concentration (and motivation).

6. Know your limits. Everyone takes a different amount of time to write the same length of paper. For me, 1500 words with a standalone prompt might take me 1.5 hours. But 1500 words with a reference (e.g. Comment on this article...) would take me 2.5 hours. And 1500 words with multi-article referencing (usually research/expository papers) might take me 3-4 hours to finish. If you know how long you take to complete the paper, you'll have a better idea of how much time to set aside.

7. Do not underestimate the reference section. It takes longer to write up references in the correct citation style than you think. Formatting also takes up a huge amount of time when you're trying to make sure the spacing and style of different text elements are consistent.

8. Finally, know your most productive time. Unfortunately for me, I tend to write better essays when I'm in a panic-induced focus between 10pm to 2am. This is probably due to a number of bad habits, but it works for me. Before my most productive time, I try to lay some groundwork on the essay (sketch the outline, write the intro, etc), so that I can focus on the actual writing during that time. Some of you work better by splitting the essay into 3 main chunks and doing one chunk per day. Some work better just setting aside 6 hours and head-bashing through the entire essay. It's up to you. Discover what works best.

That's all I have to say today. Cheers from Berkeley.

Saturday, August 28, 2010

Free Software sites

Referring to the post "Useful tech skills to know", you can get some of the links to download the free software here.

1. Typesetting
People who want to use LaTeX can get a very good compiler here, WinEdt - its great. But I find that MikTex is easier to type equations with. To install LaTeX properly, you'll need to have Ghostview and prefably Ghostscript installed too, and Adobe Acrobat reader if possible. This website tells you how to get the compilers(s). Wikibooks offers a great tutorial on using LaTeX.

2. Sound
You can use Windows Movie Maker for this also. Or you can try this one. (Vanessa: Or Audacity, which is free, open-source, and works on all operating systems).

3. Video/ movie
Download Windows Movie Maker from here. It's really easy to use. If you're using a Mac, good for you; you have iMovie.

4. Engineering/Physics
Java or C++ are good places to begin with, particularly since the compilers are free and there's loads of online tutorials floating all over the internet. Some other languages with free compilers are Ruby, python, fortran, etc.

5. Check out MIT OpenCourseWare's webpage on programming. You can links to all sort of free compilers from there.

Friday, August 20, 2010

Examples of APA Citation style

See here for a good website on how to cite references for scientific papers, homework, lab reports, etc, properly.

EDIT: 22 August 2010
'nana' suggests using this site instead. Many thanks for the suggestion!

Saturday, July 24, 2010

Useful Tech Skills to Know

This is going to come as a really random post, but in an age where everyone uses a computer for coursework I've found that certain skill-sets (soft skills) are particularly useful to have. Things like knowing how to do a bit of graphic design, or a bit of programming, can make a difference for a project or even as an addendum to your CV. You can also pick these skills up in your spare time, so it does not take a genius, or structured lessons to learn them. Some of the software I will mention below are open source, and others can cost a fortune, but you'll find for most that do that your school or faculty may have them on campus IT facilities.

Graphic Design
Useful when you need to design the occasional poster, nice powerpoint slides, programme booklet, logo, or front cover for a report. Depending on how proficient you are this can range from the very simple (like cropping, sharpening and changing brightness/contrast) to the very complicated (vectoring, redrawing, collaging and interface design), but it tends to save the day when you have a picture just perfect for your report but an ugly polar bear is sitting in the corner and detracting from the main purpose.

Programs: Adobe Photoshop, GIMP (free), Paint.NET, CorelDraw, MS Paint

Typesetting
MS Word or iWorks Pages are fantastic tools for writing that 1000 word essay, but if you happen to be working on a 50 page academic document or a 100 page convention booklet, using either of the above can get pretty iffy. For the scientifically inclined, I've found LaTeX to be a very good alternative so long you can get pass the steep learning curve. It's essentially a word processor that uses programming commands, so it's like typing programming code, except this code when "compiled" gives you your document. It is really good at handling references, bibliographies, and typesetting mathematical equations as quickly as possible. If you want to put in a lot of artsy images and have very strategically arranged text in one place or another, outsourcing text in one document to another, go for Adobe Indesign.

Programs: LaTeX2E (free), Adobe Indesign, MS Word, iWorks Pages

Sound
Knowing how to trim the first few seconds of silence in a soundtrack, or boost the overall volume, or record a narration for that video project has come in useful for me a good number of times in the six years I've been in NUS High.

Programs: Audacity (free), Logic, Reason, Adobe Soundbooth

Video/Movie
Somewhere in the NUS High curriculum is a couple of video projects, most of which generally result in cobbled together YouTube videos. Not altogether a bad option, but knowing how to rearrange videos, fade stuff in and out, throw in a bit of text overlays and export at a high resolution gives your work that much more "omph" and makes it stand out from the others. If you do want to take it further, the current state of technology is such that you can generate many things, from rain, to particles, to people, to bullet trails, all using computer graphics. Figuring out how to do so takes a significant amount of commitment, but your stuff can look really cool if you do it right.

Programs: Windows Movie Maker, Adobe Premiere Pro, Final Cut Studio, iMovie, Sony Vegas

Engineering/Physics
This is going to be a slightly niche area, but still very relevant for many of us. If you happen to be doing some kind of physics or mathematics related work you'll want to look at either Mathematica or MATLAB. These are programs which can conduct complex and detailed simulations based on almost any parameters you put in. You can use them to model the airflow around an airplane, predict the trajectory of a bouncing ball, or simply add 1+1. Mathematica is great for symbolic evaluations, whilst MATLAB is good for analytical solutions and matrices (which is it's namesake after all)

Programs: Mathematica, MATLAB, Maple, Octave (free but stripped down version of MATLAB)

Programming
I've found knowing a programming language or two extremely handy when you need to design something, either on a webpage or for a specific project. The actual needs in this area for every individual vary quite greatly, but most Science students get by knowing at least one or two for contingencies. The whole idea is that people now tend to go for "Computational Biology" or "Computational Physics" or "Computational Chemistry", and essentially where "Computational-" is appended to the front of a field, you use a programming language, which is linga franca of the computer in front of you right now.

Programs: JAVA, C++, C#, HTML/JavaScript, PHP, Visual Basic, the list goes on...

So at this point you might ask: why would I need to go master/learn any of these things? Can't I just submit a normal report, maybe spending a bit more time formatting my word document, or having a movie with just a bit less effects, or just leaving a couple of seconds of silence in my sound clip? The fact is, it all boils down to presentation. For the grade-oriented, aesthetic appeal can make a difference in the work you submit, because it is so much more pleasing to view. Everyone has seen the jerky video, the boorish, flashy poster with mismatched fonts and the screechy sound track. Apart from the grades, knowing techniques which are relevant to the field you intend to study in the future can make your life in University easier, because you don't spend time learning all of it. As an example, a good number of universities worldwide use LaTeX as their main publishing method. Also, if say you are applying to Computer Science, being able to state that you know a few programming languages does show your interest in the area.